Description
Unleash the absolute maximum power of your Prince tank with the Genuine SMOK TFV12 Prince RBA Coils . Specifically designed for the legendary TFV12 Prince Sub-Ohm Tank, this Rebuildable Atomizer (RBA) head bridges the gap between convenient sub-ohm tank systems and advanced DIY building. Featuring a massive, user-friendly build deck, the Prince RBA allows you to install your own custom heating coils and cotton wicks. This gives you complete control over your vapor temperature, draw restriction, and flavor saturation while drastically cutting down on long-term coil replacement costs. Key Features & Benefits Massive Dual-Post Build Deck: Engineered with a generous velocity-style building deck. This layout provides plenty of room to easily mount, align, and trim large, complex dual-coil configurations. Pre-Installed Dual Clapton Coils (0.25Ω): Ready to build straight out of the box! The RBA arrives pre-loaded with a high-performance dual Clapton coil configuration registering at approximately 0.25 Ohms for immense vapor production and warm, saturated flavor. Substantial Airflow Delivery: Features oversized internal airflow vents directly beneath the coils, perfectly routing the tank’s bottom-airflow to cool your custom builds efficiently. Unmatched Cost Efficiency: Swap your wicks and wire instead of replacing entire metal coil shells, saving you substantial maintenance costs over time. Technical Specifications Feature Specification Deck Style Large Velocity-Style Dual Post Rebuildable Deck Pre-Installed Resistance 0.25Ω (Ohm) Dual Coil configuration Pre-Installed Coil Type Dual Clapton Coils Airflow Design Direct-to-Coil Bottom Airflow Vaping Style Direct-to-Lung (DTL) Tank Compatibility Guide ⚠️ Important Compatibility Note: This RBA is engineered specifically to accommodate the massive structural dimensions of the TFV12 Prince series. This RBA head is compatible ONLY with: SMOK TFV12 Prince Tank (included in the SMOK Mag, X-Priv, G-Priv 2 Luxe, and Prince Kits) Note: This RBA will NOT fit standard TFV12 Cloud Beast King tanks, TFV12 Baby Prince tanks, or any TFV8/TFV16 series. How to Install & Wick the TFV12 Prince RBA Getting your new Prince RBA ready for use is highly rewarding. Follow these simple steps for a perfect build: Mount the RBA: Screw the base of the Prince RBA firmly into the bottom deck hardware of your TFV12 Prince Tank. Check for Hotspots (Dry Burn): Before threading your cotton wicks, attach the tank base to a regulated mod. Gently pulse the fire button at a low wattage (around 15W to 20W) to ensure both Clapton coils glow evenly from the inside out. Let them cool down completely. Thread the Cotton: Slide a strip of premium organic cotton through the centers of both coils. Cut the ends so the cotton tails sit comfortably in the deep wicking channels on either side of the deck without being packed too tightly. Pre-Saturate (Prime): Drip plenty of e-liquid directly onto the newly installed coils and cotton wicks until they are completely wet. Reassemble & Soak: Screw the outer metal RBA sleeve back over the deck, reassemble the tank, and fill it to the top. Let the setup sit upright for 10 minutes before taking your first puff to ensure the wick is drawing perfectly. What’s Included: 1 x SMOK TFV12 Prince RBA Head (with 0.25Ω dual Clapton coils pre-installed) 1 x Organic Cotton Pad 1 x Allen Key/Screwdriver Tool 1 x Spare Parts Bag (including spare screws and O-rings)
